#Flow free bridges extreme pack level 60 manuals
#Flow free bridges extreme pack level 60 full
#Flow free bridges extreme pack level 60 software

If you like Flow Free, you'll love Flow Free: Bridges®!Ĭonnect matching colors with pipe to create a Flow®.

#Flow free bridges extreme pack level 60 manuals

Mounting: Place on desktop, attach to wall, or place inside another enclosure (OEM)įor user manuals and application notes visit the instrunet web site.From the makers of the #1 hit app Flow Free®, comes a fun and challenging new twist: Bridges! Unregulated Power Available to User At Hd44 Connector: 5 Vdc (8 mA), ☑5 Vdc (4 mA) Voltage Reference At Hd44 Connector: 3.30 Vdc (80 mA) Power Consumed From USB Cable: +5 Vdc 255 mA typical (433 mA max)

Operating Environment: 1 to 70☌ (34 to 158☏), <90% RH, no condensation “1” Output Voltage: 2.2 to 3.3 Vdc at 4 mA

“0” Output Voltage: <0.7 Vdc at <2 mA < 0.9 Vdc at 4 mA “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pulldown resistor) Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V) LVDT/Flow/Pressure: Current, voltage, mV/V

#Flow free bridges extreme pack level 60 full

1⁄4 bridge, half bridge or full bridge internal i60x voltage reference supports a maximum of three 120 Ω bridges and eight 350 Ω bridgesĬurrent: ☘0 uA, ☑20 uA, ±500 uA, ☖00 uA, ☘00 uA, ☑.2 mA, ☒.5 mA, ☑2 mA, ☒4 mA, 0 to 24 mA, custom Thermistor: 2252 Ω (OMEGA 44000 Series), custom Thermocouple: J, K, T, E, R, S, B, N, C, G, D RFI Filter: 13 KHz RFI filter on 110dB (0 to 60 Hz) Protected Voltage: ☓0 Vdc with power on or off Voltage: See voltage accuracy/range charts 100 mSec), Sample-Rate (samples-per-second-per-channel), Digital IIR Filter (Low Pass, High Pass, Band Pass, or Band Stop), Voltage Measurement Range (☒0 mV to ☑0V), Sensor Type, and Single-Ended or Differential Wiring.Įxcitation power (+3.3V ☐.2V, 2V) or low (e.g.

#Flow free bridges extreme pack level 60 software

For accuracy and sample rate details on all supported input signals, see the tables at the end of the spec sheet.Įach channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0. Maximum sample rate is for ±5V input signal. Included in the box: iNET-600 Series Hardware Device, USB Cable, Software on CD, Mating Hd44 Female Connector and Hd44 Cover.ĭigitize at a maximum sample rate of 160K sample/sec for 1 channel, 16Ks/sec/ch for 2 channels, 8Ks/ sec/ch for 4 channels, and 4Ks/sec/ch for 8 channels.

No additional components, such as external power supply, are required. INET-600 Series is a stand-alone USB data acquisition system. If one is working with thermocouples, an iNET-510 wiring box is required due to its internal cold junction compensation. Alternatively, one can attach iNET-600 Series to the following optional wiring boxes: iNET-500, iNET-511, iNET-512. Included is a mating Hd44 Female Connector and Cover. Voltage input range on each channel is independently software programmable to one of: ☒0 mV, ±40 mV, ☘0 mV, ☑50 mV, ☓00 mV, ☖00 mV, ☑.2V, ☒.5V, ±5V, ☑0V. The iNET-600 Series A/D module provides 16SE/8DI voltage input channels (Ch#1.#16), each of which are independently software programmable with Windows software that support the directĬonnection to many common sensor types. Click on this link if you need more information about Data Acquisition.